Zodiac MX9 Cleaner
The Zodiac MX9 pool cleaner, the hydraulic pool cleaner for cleaning the floor and walls of inground and aboveground pools up to 12 x 6 meters, which thanks to the turbo-suction of its two propellers ensures effective cleaning even at low flow rates.
Tutorial Video Hydraulic Pool Cleaner Zodiac MX8 and MX9
Zodiac MX9 pool cleaner features
- For Floor and Wall Cleaning
- Coatings: gresite, liner, polyester hull, reinforced PVC, painted concrete
- It is recommended a cleaning cycle with a filtration of 6 hours in 3 cycles of 2 hours.
- Turbo suction
- Mechanical suction: suction turbine
Turboaspiration thanks to the use of its two propellers
The Zodiac MX9 Hydraulic pool cleaner has a powerful suction turbine and two suction propellers with brushes considered as a whole as a Turbo suction system that are able to direct the dirt and debris from your pool to the mouth of the cleaner providing an effective cleaning which is able to operate even with a low flow rate.
Hydraulic robots that connect to the filtration system (skimmer or cleaner intake) use the power of the filtration pump to move around the pool. The robot's wall climbing capacity varies depending on the shape of the pool and the available water flow. The debris sucked up by the robot remains in the prefilter of the filtration pump or in the leaf trap (accessory included or optional depending on the model).
Cyclonic Brushing
This technology is capable of detaching embedded dirt before it is vacuumed up. The active cyclonic brushes of the pool cleaner remove any type of debris, including stubborn algae or dirt that sticks to the bottom and walls of the pool, whether it is in-ground or above ground.
X-Drive pre-programmed navigation
This navigation system allows the Zodiac MX9 Cleaner to ensure impeccable coverage of the entire pool by methodically navigating all areas of the pool regardless of depth or whether your pool is rectangular, oval or free-form.
What accessories are included with the MX9 pool cleaner?
- Cyclonic cleaning brushes
- Twist Lock hoses
- Conical adapter
- Elongated 45° elongated - 45° elbow
- Automatic flow regulator
- Automatic flow rate adjustment valve (skimmer)
Warranty information
3 years from the manufacturer according to Royal Decree Law 7/2021, April 27th.
*The correct functioning of the equipment cannot be guaranteed, both on the bottom and on the walls, as long as the pH level is not correct, the pool contains slime or algae or the filters are clogged by excess dust, and a total cleaning of the pool has not been previously carried out, as well as any pool with irregular surfaces on the walls such as steps or ribs, or insufficient pump power depending on the liner*.
