Zodiac CNX 20 robotic cleaner

CNX 20 robotic pool cleaner

The CNX 20 is an agile and powerful robot cleaner of the latest generation for the complete cleaning of the pool: bottom, walls and water line.

With cyclonic suction, intelligent sensors, double traction motor and the most advanced features to achieve a pool that is always impeccable.

ZODIAC CNX pool cleaner range !

Agility with maximum power

For what type of pool?

For in-ground and above-ground pools with rigid walls.
All types of pools
All bottoms and liners
For pools up to 10 x 5 M
Cleaning of bottom, walls and waterline

Cyclonic suction and other benefits

Cyclonic suction via patented Zodiac technology technology that provides a powerful and constant suction. In addition, its suction width of 23 cm facilitates a large suction capacity.

The CNX 20 robot cleans the bottom, walls and water line and adapts to all types of pools of different shapes and liners.

This model of pool cleaner is an ideal product of great versatility and is recommended for use in pools not exceeding 10 x 5 m of surface.

Its two cleaning programs make the CNX 20 easy to use and makes it an efficient robot cleaner. It has 2 cleaning cycles: bottom only (1h 30 min) and bottom, walls and water line (2h 30 min).

Fast and agile movement

It has double traction motorcyclonic suction, intelligent sensors and the most modern features to achieve the best results in your pool and the best mobility of the robot on all types of surfaces.

Available automatic stop out of water and electronic motor protection, making it a safe robot.

Propeller-shaped front brushes

Helical shaped brushes for efficient suction of all fine and light debris on all parts of the pool.

23cm of suction

With its high-capacity suction nozzle of 23 cm

Helical shaped brush

Easy handling of the robot

It has a 100 micron particle retention filter that will make your pool always clear and clean.

Easy top access to the filter with transparent lid allowing for easy cleaning of the filter and viewing of debris collected in the filter without having contact with the dirt.

Large capacity rigid filter: 4 liters.

15 meters of cable and only 8 kg weight which makes it very light.

Easy maintenance of the main parts (motor block, cable, etc.).

Fast water evacuation. For effortless removal of the cleaner from the pool.

TRANSPARENT COVER: Allows to visualize the waste collected in the filter.

TOP ACCESS TO THE FILTER Facilitates daily use.

Included Accessories

Control Unit

Allows to start and stop the robot, as well as the possibility to select the cleaning cycle.

Rectangular filter

Ideal filter for small and large particles such as leaves, soil or 100μ pine needles.

Base

Protects and houses the control unit from direct contact with the ground.

Optional Accessories

 

Double level filter: 150 / 60μ.

Double level filtration set: 150 / 60μ. Maximum filtration capacity for the finest debris.
Single filter of 200μ.

Cover

Nylon and waterproof pvc to protect your robot from sun, cold, rain or dirt.

Ask for information if you are interested

Information and recommendations for use of the CNX 20

• The CNX 20 is a mid-range pool cleaner that has been designed to adapt to all types of flat or gently sloping pools. In those cases in which the filtration equipment of our pool does not provide the necessary power to operate a hydraulic cleaner, it will be necessary to use an electric cleaner that can perform the maintenance of our pool satisfactorily.
• It must be taken into account that it will be the most efficient autonomous cleaning option for our pool, since it is an intelligent robot that will be able, depending on its characteristics, above any other method, to detect which areas remain to be cleaned and which is the best possible cycle to clean our pool.
• To be the most reliable product for the cleaning of our swimming pool also implies of some cares and maintenance superior to other products to lengthen its useful life and that its performance is prolonged in the time. That is why we have to take into account the following points:
• Outside the cleaning cycle, it is essential that the pool cleaner remains out of the water under cover to avoid the humidity factor and direct contact with pool chemicals.
• It is convenient to rinse the pool robot with fresh water and clean its filter after each cleaning cycle to free it from chemicals and possible obstructions. This way you will be able to perform your cleaning task at the highest level every time without any inconvenience.
• The outdoors is the pool cleaner's worst friend. It is important to keep in mind that it is a product with a high cost and therefore susceptible to theft. On the other hand, it is advisable that weather conditions such as humidity, wind and especially the sun do not come into daily contact with the robot to avoid damaging the casing and the rest of its components.
• Although a pool cleaner is designed to keep our pool clean, the disinfection of the pool will still be the most important thing and independently it will be obligatory to maintain the correct parameters of the water. The chlorine level and the Ph level of the pool must always be at the correct level if we want to submerge the robot.

Warranty information

3 years. See the conditions in the Warranty Document.

* 2 years + 1 additional year if the cleaner is linked to the iAquaLink™ application. See conditions in the Warranty Document.


*The correct operation of the equipment cannot be guaranteed both on the bottom and on the walls if the pH level is not correct, if it contains slime or algae or if the filters are clogged by excess dust, and if the pool has not been thoroughly cleaned beforehand, in addition to any pool with irregular surfaces on the walls such as ribs, including pool steps.