Aquabot Neptune Cleaner

Aquabot Neptune

The Aquabot Neptuno pool cleaner has a 17 meter flotation cable (no individual floats) and is installed to the unit with a connector.

The Aquabot Neptune cleaner transformer enhances the visual appearance of the cleaner.

It is available for 230v or 115v depending on the output to be used.

The switch has an automatic fuse disconnect and has a special plug to connect the cable.

The cleaner transformer should be located at least 3 meters away from the pool.

Technical features

• Recommended pool size: Up to 80m2
• Filtered water volume: 16m3/hour
• Cleaning coverage: 550m2/hour
• Flotation cable: 18m
• Steering motor: 1 high speed submersible 12v d.c. motor
• Pumping motor: 1 20v d.c. submersible motor
• Filter bag: 2 micron
• Electrical specifications: 230v/50hz
• Water voltage: 22v
• Equipment dimensions: 43,8x38,10x26,67cm

Comparison of cleaners

*Scroll horizontally to view the complete table.

Model		E10	Neptune	DX3	Shark Vac
Manufacturer	Astralpool	Dolphin	Aquabot	Dolphin	Hayward
Bottom/Mid-Rod	Yes	Yes	Yes	Yes	Yes
Wall	No	No	No	Semicircle	No
Floating line	No	No	No	No	No
Pool length	8 meters	8 meters	8 meters	8 meters	8 meters
Cleaning Cycle	1.5 hours	1,5 hours	2 hours	3 hours	2 hours
AquaSmart	Yes	No	Yes	No	No
Gyro Scanning System	Yes	No	No	No	No
Rotating Central Brush	Yes	No	No	No	No
Possibility External Programmer	Yes	No	Yes	No	No
Floating Cable	16 m	12 m	18 m	18 m	15 m
Swivel Anti-Knot System	Yes (electronic)	No	No	Yes (mechanic)	No
Transport Trolley	No	No	No	No	No
Filtered water (m³/h)	22 m³/h	17 m³/h	16 m³/h	17 m³/h	17 m³/h
Top Access Filters	Yes, Ultrafine 3D	Yes, Fine	No	No	No
4WD	Yes	No	No	No	No
Robot Weight	7,5 kg	6,3 kg	8.1 kg	8.5 kg	9.75 kg
Engine Block	Yes	Yes	No	Yes	Yes
Adjustable suction nozzles	Yes	No	No	No	No
Remote Control	No	No	No	No	No
Programming Settings	No	No	No	No	No
Warranty	2 Years	2 Years	2 Years	2 Years	2 Years
Price	599 €	550 €	650 €	625 €	699 €

Warranty Information

2-year manufacturer's warranty on motors, transformer and cable according to your conditions.

*The correct functioning of the equipment cannot be guaranteed, both on the bottom and on the walls, if the pH level is not correct, if it contains slime or algae or the filters are clogged by excess dust, and if the pool has not been previously cleaned completely, as well as any pool with irregular surfaces on the walls such as steps or ribs*.