Certikin RGB multicolor LED lamp

Certikin RGB Multicolor LED Lamp

White light LED projector of low power consumption (35W) and high intensity with 1100 lumens of luminous flux.

Its long life is 100,000 hours. 70% of luminous flux after 50,000 hours. Ideal for: Concrete, prefabricated and liner pools. The HIGH LUM V1 range is the result of the evolution of Certikin LEDs. HIGH LUM V1 offer higher light intensities and higher energy efficiency than their predecessors.

Available in colored LEDs (RGB) or white light.

Their improved luminous efficiency makes it possible to optimize installations. The new HIGH LUM V2 range is available in HIGH LUM V2 PAR56 and HIGH LUM V2 Point of Light versions with single color and color (RGB) options, with a choice of white ABS or stainless steel trim.

They offer an increase in brightness of 260% in the white light models and more than 125% in the RGB models compared to the CERTILED range. Improved energy efficiency compared to the CERTILED range.

Compared to the traditional 300W PAR56 lamp, the new HIGH LUM V1 has a 100 times longer lifetime and 4 times lower energy consumption. This floodlight has been designed to be used completely submerged in freshwater pools. It is a class III electrical device with a very low safety voltage (12 V with alternating current).

To clearly illuminate a swimming pool, it is recommended to install one floodlight for every 20 m2 of water surface.

In particularly deep pools, one floodlight for every 25 m3 of water volume is necessary. In order to avoid glare, the floodlights should be installed facing away from the usual view of the pool. If lighting is used in competition or training pools, the floodlights should be installed on the sides to avoid dazzling the swimmers.

To avoid the emptying of the pool in case of maintenance, it is recommended to install the floodlight in places accessible from the upper edge of the pool.

In installations where it is desired to replace a conventional spotlight with a LED projector, taking advantage of the existing wiring, it is strongly recommended to use underwater resin joints. The use of silicones is not recommended to try to achieve watertightness at the junction point of the cables.

The spotlight must not be manipulated under any circumstances, such manipulation would mean the loss of the warranty.

Technical characteristics:

• Voltage-12V
• Consumption-35 W
• Lifetime-100,000 hours
• Protection-IP68 Class III