Chlorine Multiaction Granular Chlorine CTX-390GR
With the ctx Professional guarantee, the granulated chlorine ctx-390/gr MultiAccion is specially formulated to eliminate bacteria, viruses and microorganisms in general, prevent the development of algae and keep the water clear and crystal clear.
Manuals
Pool Maintenance Manual
Product data sheet
Properties
| Appearance | Granular solid |
|---|---|
| Color | White and blue |
| Useful chlorine content | 88 % |
| pH (5%) | 2,5 - 3 |
CTX-390/GR Multi-Action Chlorine
Slow dissolving granulated Multiaction. Suitable for its punctual dosage in the water in the absence of bathers, sprinkled all over its surface and with the filtration stopped to let flocculation take place.
The next day pass the cleaner and then start the filtration equipment with Multifunction tablets in the skimmers.
Ideal for all types of pools.
It offers in a single product, the action of the chlorinated disinfectant, a flocculant action, and also the algaecide. It also has a stabilizing action of the disinfectant against UV radiation.
Initial Treatment
- Add 15 grams of Dichloro Granulado CTX-200GR Clorshock per m3 of water.
- After 2 hours, adjust the pH of the water to between 7.2 and 7.6 using CTX-10 Solid pH Reducer or CTX-20 Solid pH Increaser.
- The Initial Treatment (Superchlorination) should be repeated whenever a lack of transparency in the water is observed.
Maintenance Treatment
Once the pH of the water is adjusted, add daily 1 to 2 grams of CTX-390/Gr MultiAction per m3 of water.
These doses are for guidance only and can be modified according to the characteristics of each pool, climate, etc.
Introduce the necessary dose of CTX-390/Gr MultiAction inside a skimmer, then turn on the filtration equipment, so that the product can be dissolved when the water circulates through the skimmer.
It is also possible to distribute the dose of CTX-390/Gr MultiAction over the surface of the pool equally.
The addition of CTX-390/Gr MultiAction should preferably be done at dusk and without the presence of bathers in the pool water.
The free residual chlorine should be between 0.5-2 mg/l, a value that can be easily measured using a chlorine and pH analyzer kit.
This control should be carried out at least twice a day.
These doses are indicative and can be modified according to the specific characteristics of each pool, climate, etc.
The recommendations for use are given for information only and may vary due to changes in the formulation or modifications made by the manufacturer. It is necessary to follow the instructions contained in the label accompanying the product.
Available in containers of:
- 07897 - Pack 4 containers of 5 kg (20 kg in total, the kilo costs 7.25 €).
- 07897 - Pack of 5 kg (the kilo costs 7,98 €)
- 19196 - Pack of 25 kg (the kilo costs 6,76 €)
-
Blue Connect & Salt Analyzer€209.00 -
Zodiac XA 4010 iQ Pool Cleaner€1,269.00
