Avantgarde square composite pool Gre

Recommendation before purchase

Recommendations

Installation Service

Installation service conditions

Manuals

Gre Subay City Swimming Pool Instruction Manual

Gre Wooden Swimming Pools Catalogue

Video

Presentation Gre Avantgarde Swimming Pool

Tutorial Swimming Pool Avantgarde Gre

Avantgarde square composite pool Gre

Gre Avantgarde above-ground pools have a solid structure of pre-assembled composite panels, an exclusive and resistant material with no maintenance and totally sustainable. The new KPCOR28 square-shaped model measures 3.26 x 3.26 meters and stands out for its elegant design that integrates perfectly into rustic or modern gardens, without requiring much space.

Characteristics Composite Avantgarde square

• 60/100 gray PVC liner with anti-UV treatment (delays aging).
• The Avantgarde square pool features high value-added finishes such as composite beaches with aluminum trims.
• Structure, it has reinforced sides with metal wedges which are fixed on the concrete slab (mandatory and with a minimum thickness of 15 cm).
• Sand scrubber 4 m³/h with pump, filter and selector valve (also includes flint sand).
• Ladder exterior composite ladder with 4 steps and interior stainless steel ladder with 3 steps.
• Skimmer with enlarged mouth and return valve.
• Protective blanket for the floor in polyester 110 g/m².

*Scroll horizontally to view the complete table.

Tips:

If we decide to leave the pool set up in winter, we should consider the following:

• Leave the pool full of water, bearing in mind that:
• For pools with skimmer and return valve: water level 5 cm below the skimmer and close the return valve with the screw cap supplied with the filter unit.
• For pools with inlet and return valve: water level 20 cm from the top of the pool and close the valves by means of the screw system incorporated in the valves.
• Disconnect the hoses. Do not disassemble the skimmer (if any) or the valves.
• Protect the pool with a winter cover and place a large inflatable element between the water and the cover to protect the pool against the cold.
• To avoid the formation of algae during this period of time, use a chemical product for the wintering.
• With regard to the filter, it is advisable to disconnect it from the pool, clean it, empty the sand, dry it and store it in a covered place without humidity.