Liquid flocculant CTX-41

Manuals

Pool maintenance manual
Product data sheet
Product safety data sheet

Properties

Flocculant CTX-41

Newly designed polymer with a high flocculant power capable of eliminating colloidal particles found in pool water.

• High coagulation speed.
• Good settling speed.
• Satisfactory behavior at low temperatures.
• Possibility of use in a wide pH range.
• Elimination of consumption of pH adjustment products.
• Less tendency to cause overdosing phenomena.
• Eliminates metal ions such as iron and manganese.
• Formation of easily filterable flocs. Lower content of soluble aluminum in treated water.
• Removal of organic matter.
• Effectiveness against high turbidity water.
• Improves the bacteriological quality of the water and consequently reduces the consumption of products used in disinfection.

Initial Treatment

With the filtration equipment stopped and without the presence of bathers in the pool, add 10 ml. of product per m3 of water.

Pour the required dose of product in a container with water and spread this solution evenly over the surface of the pool.

After about 8 hours, proceed to collect and remove the layer of flocs deposited on the bottom of the pool.

Maintenance Treatment

It can be carried out by means of a dosing pump, injecting before the filter 0.5 ml. of product for each m3 of circulating water.

These doses are approximate and can be modified according to the specific characteristics of each pool, climatology, etc.

The recommendations for use are given for information only and may vary due to changes in the formulation or modifications by the manufacturer. It is necessary to follow the instructions contained in the label accompanying the product.

Available in containers of:

• 03117-4 Saving pack of 4 containers of 5 liters (20 liters in total, the liter comes out at 3.55 €).
• 03117 - Pack of 5 liters (the liter is 3.98 €)
• 03118 - 25 liter container (the liter costs 3,20 €)