CTX-50 WallCleaner Descaler Cleaner

Manuals

CTX-50 Descaling Cleaner Technical Data Sheet

Safety Data Sheet Descaler Cleaner CTX-50

Swimming Pool Maintenance Manual CTX

CTX-50 WallCleaner Descaler Cleaner

Liquid surface descaler cleaner.
Ideal for: All types of swimming pools for cleaning the pool shell and se silex or sand filters.

Advice for use:

• General cleaning of the empty pool. Apply the product undiluted on the surfaces to be cleaned, spreading the product well on bottom and walls. Leave the product to impregnate for about 1/2 hour and then rinse with plenty of water. If the incrustation persists, the operation should be repeated again. In the parts where the incrustation is very intense, it is convenient to help the action of the product rubbing with a brush. Apply the product by means of a sprayer, which does not form a mist or watering can. The product consumption is 25 liters per 100 m³ of pool volume.

• Filter cleaning. Treatment only suitable for filters with flint or sand filter load. Steps to follow:

1. Completely empty the water inside the filter.
2. Open the filter at the top and pour the product inside, covering the filter load.
3. Leave the product to react for approximately 30 minutes.
4. Close the filter and then perform an intense washing.

Indicative doses that can be modified according to the specific characteristics of each pool, climatology, etc.
The recommendations for use are given for information only and may vary due to changes in the formulation or modifications made by the manufacturer. It is necessary to follow the instructions contained in the label accompanying the product.

Available in containers of:

• Code 03123 - 25 liter container (the liter costs 2,08 €).
• Code 03122 - 4 containers of 5 liters (20 liters in total, the liter costs 2.10 €).