Gre Oval Inground Swimming Pool Madagascar
Gre Madagascar Series oval-shaped steel wall inground pool.
Recommendation before purchase
Installation Service
Installation service conditions
Manuals
Inground Steel Wall Swimming Pool Catalog Atolon
Inground Steel Walled Swimming Pools Instruction Manual Atolon
Inground Steel Walled Swimming Pools Installation Manual
Video
Gre Oval Inground Swimming Pool Madagascar
The Madagascar inground pool has all the features of traditional inground pools.
It is an economical alternative to in-ground pools, guaranteeing safety and great durability. In addition, it fits perfectly into any garden or terrain as well as the general aesthetics of the environment where it is installed.
The inground pool has the following characteristics:
- It is an oval steel-walled in-ground pool.
- PVC liner blue color 75/100
- Pre-lacquered sheet 70/100
Depending on the model, it is equipped with:
- 10m ³/h or 8m ³/h sand filter, including skimmer set, connection hoses, fittings and flint sand.
- Stainless steel ladder with 4 steps.
- Protective polyester blanket
*Scroll horizontally to view complete table
| Model | Dimensions (cm) | Height (cm) | Capacity (liters) | Weight (kg) | Filtration equipment (m3/h) | Space required (cm) | Ladder |
| KPEOV5059 | 500 x 300 | 150 | 16.015 | 139/224 (2 pallets) | 8 | 700 x 500 x 165 | Stainless steel 4 steps |
| KPEOV6059 | 600 x 320 | 150 | 24.420 | 164/224 (2 pallets) | 10 | 800 x 520 x 165 | Stainless steel 4 steps |
| KPEOV7059 | 700 x 320 | 150 | 27.470 | 189/224 (2 pallets) | 10 | 900 x 520 x 165 | Stainless steel 4 steps |
| KPEOV8059 | 800 x 400 | 150 | 38.840 | 2179/224 (2 pallets) | 10 | 1000 x 600 x 165 | Stainless steel 4 steps |
Tips:
If we decide to leave the pool set up in winter, we must take into account the following:
- Leave the pool full of water, bearing in mind that:
- For pools with skimmer and return valve: water level 5 cm below the skimmer and close the return valve with the screw cap supplied with the filter unit.
- For pools with inlet and return valve: water level 20 cm from the top of the pool and close the valves by means of the screw system incorporated in the valves.
- Disconnect the hoses. Do not disassemble the skimmer (if any) or the valves.
- Protect the pool with a winter cover and place a large inflatable element between the water and the cover to protect the pool against the cold.
- To avoid the formation of algae during this period of time, use a chemical product for wintering.
- With regard to the filtering system, it is advisable to disconnect it from the pool, clean it, empty the sand, dry it and store it in a covered place without humidity.
